Today we are very happy to release the completely re-developed All-in-One Sash Window Family 3.0 that brings a much better organized Parameter Structure, massively better performance and great new features.
Until the end of this year, we want to release also a complete re-developed All-in-One Door Family and by the beginning of next year the Next Generation of our All-in-One Families which will bring the Subject of Revit Families to a complete new level. But more about this Next Generation by end of this year.
Today I want to focus on the new All-in-One Sash Window 3.0 and its Improvements and New Features.
Thursday, 4 November 2010
Wednesday, 20 October 2010
Thursday, 19 August 2010
The All-in-One Revit Bi-Fold Door Family 3.1 has been released, it is now not just the most advanced and most flexible Revit Bi-Fold Door, but also a Revit Sliding Door Family. All together in one single advanced parametric Revit Family.
Thursday, 5 August 2010
The All-in-One Revit Elevator Family is the first and only Revit Elevator Family that allows you to create any Elevator in your Revit Project independent of level heights, number of levels, split levels, etc.
The All-in-One Revit Elevator Family is very powerful and at the same time very simple to use. To show you how simple it is to insert and adjust this Elevator Family, we have released the first two Video Tutorials which you can watch online or download at:
Thursday, 22 July 2010
The Escalator as well as Travelator have finally joined our All-in-One Series.
This new Version is not just a regular update as this Revit Family has been created completely new. This new All-in-One Revit Family includes now an Escalator as well as Travelator in just one single Family and the transition between them is seamless as it changes automatically depending on the Angle.
Additionally to this amazing feature of setting up a Travelator from 0 degrees up to an Escalator with 45 degrees and other great improvements with the Balustrade, the Steps, the Handrail as well as the Truss (Landing and Run) that are fully parametric and adjustable to your requirements, you get now a large selection of preset Manufacturer Models with the included and constantly maintained Type Catalog.
To learn more about all the great Features of this Revit Escalator - Travelator Family visit us online at our All-in-One Escalator - Travelator Webpage.
The All-in-One Kitchen Family is by far the most successful furniture Family ever, and it gets even better with the new released update Version 3.2. With the previous Version it was already possible to setup a floor or wall based corner unit but it was limited to just doors on each side. With Version 3.2 this limitation does not exist anymore !
Version 3.2 of the All-in-One Kitchen Family lets you setup any combination of a Corner Unit using any kitchen unit that you can setup with this advanced parametric Revit Family.
Tuesday, 29 June 2010
From today the All-in-One Elevator 1.2 is available for download. You can read more about the fixes and improvements of this update at www.revit-content.com/content/elevator/releasenotes
To learn more about this amazing Revit Elevator Family visit our Website at www.revit-content.com/content/elevator
Tuesday, 22 June 2010
The All-in-One Elevator Family released on last Wednesday was waited for by so many Revit Users that the number of downloads has beaten our All-in-One Door Family which is still our most successful All-in-One Revit Family. Due to the early announcement of the Elevator Family we had already a waiting list of more the 250 Revit Users all over the world.
This All-in-One Elevator Family is the first member of our All-in-One Series that comes with preset Manufacturer Types so that you can setup your own Elevator accordingly to your specific Project and requirements or you just pick a preset Elevator and insert it in your Project.
Together with the All-in-One Elevator Family we have introduced an additional service that allows you to report a manufacturer Model of the Elevator you would specifically need and we will add it to the Type Catalog within 24-48 hours. Together with this FREE service, the All-in-One Elevator Family is probably one of the most valuable Revit Families existing.
You can find out more about which Elevator already preset in the Type Catalog or report your required Elevator Model online for the Metric Version and the Imperial Version.
Friday, 18 June 2010
The All-in-One Elevator Family has finally joined the successful series of our All-in-One Revit Families and is available for you to download as Metric and Imperial Version.
The goal with this Elevator was to develop one advanced parametric Revit Family that allows you to build any kind of Elevator for your Revit Project independent of your project specific situation. There are a few Elevator Families available, but they all have limitations like a maximum number of levels, just equal level heights, etc.
Our All-in-One Elevator Family has none of those limitations and lets you build any Elevator independent of your level-heights, number of levels, split levels as well as shaft door locations (front, front-rear or front-side).
Following you can find an overview of the great Benefits our All-in-One Elevator brings to you and your Revit Project. To learn more about further details, please visit us online on our All-in-One Elevator Webpage.
The Elevator System
There are many different Elevator Systems available by various Companies. This All-in-One Elevator Family is the only Revit Elevator Family available that combines all available Elevator Systems in just one advanced parametric Revit Family. The geometry of this Elevator Family is optimized and it takes advantage of the advanced parametric capabilities of Revit without using duplicated elements. This All-in-One Revit Elevator Family was designed from the ground up to be adjusted to the following Elevator Systems that you can switch between just by adjusting one Parameter:
The Shaft - Pit / Overhead
The Elevator is a central element in any multi-story project and therefor the Elevator Shaft isn’t just important for the elevator it self, it is often essential for the surrounding areas like staircase, entrance halls, etc.
The All-in-One Elevator lets you display the inner shaft volume as a reference to align your shaft walls as well as the bottom and top slabs. The Shaft Parameters give you all the necessary parameters to setup the Pit, Overhead as well as any Voids you might need for your Shaft Doors.
With this All-in-One Elevator Family you have no limitations in Shaft Height, Count of Levels, Split Levels as well as Shaft Doors. You can build any Elevator with any Shaft Door Configurations.
The Shaft Doors
The Shaft Doors are Wall based and let you insert your Shaft Doors at any Level as well as for various Elevator Configurations. This Way you are not limited in the number of levels, if you have split levels or you have a Front - Rear or Front - Side accessible Cabin, you can place just a Front Shaft Door on one Level and the Rear Shaft Door on another Level. It was never easier to configure an Elevator Shaft/Door within Revit.
This All-in-One Elevator Family offers not just the perfect solution for the Shaft and the Shaft Doors but it gives you the most parametric Elevator Car / Cabin available. The All-in-One Elevator Car / Cabin is fully parametric and can be adjusted to 3 different access types (Front, Front - Rear, Front - Side) and it can be adjusted from any squared shape to any rounded shape.
Elevator Accessories The All-in-One Elevator Family includes a wall mounted as well as a free standing call pad which are fully parametric and adjustable in their position.
Inside the Cabin you can show a Handrail as well as a Kick-Plate which are both parametric and therefore adjustable to your requirements.
Preset Elevator Types This All-in-One Elevator Family lets you setup any Elevator System for your Revit Project, and even more convenient, it comes already with a preset Type Catalog so that you just need to select your Manufacturer as well as Elevator Model you need and everything is preset for you out of the box.
The Catalog File included with the download includes major Elevator Models from Otis Elevator, Schindler Elevator as well as Thyssen Elevator. The Imperial Version comes with the major Elevator models for the US and the Metric Version with the major Elevator models for Europe.
Click on one of the following Links to learn more about the available preset Elevator Models for the All-in-One Revit Elevator Family:
Metric Version of the Type Catalog
Imperial Version of the Type Catalog
This All-in-One Elevator is a genuine Advanced Parametric Revit Family !!
Learn more online at www.revit-content.com
Wednesday, 16 June 2010
We have received so many enquiries regarding discounts for purchasing more than one of our amazing advanced parametric Revit Families. Following to this countless enquiries we are very happy to introduce our Bulk Discounts at http://www.revit-content.com/pricing.htm
Friday, 14 May 2010
The All-in-One Kitchen Unit is probably the most valuable Revit Furniture Family available. This fully parametric Kitchen Unit takes full advantage of the parametric Revit Family Features and let you setup any kitchen unit and kitchen arrangement that you need for your Revit Project.
We are very happy to let you know that the Version 3 of this amazing Revit Kitchen Family has been released today with great new features and improvements of existing features.
Following a brief overview of the new and improved Features that you can benefit of in the new All-in-One Revit Kitchen Family 3.0:
Double Bowl Sink
One of the most asked Features now available in Version 3, is the fully parametric Sink which can now be setup with either just one or with two bowls and can be adjusted independently from each other. The Drainer automatically adjusts its width to show at all times the right offset even if the second bowl is activated. Version 3 brings now also a fully parametric Tap that can be rotated, and be fully adjusted.
Another Feature that has a huge demand from our customers is the Extractor Fan which is now built so that it can be shown with just one click. The Extractor Fan is fully Parametric and can be adjusted for a wall mounted kitchen unit as well as a free standing kitchen island unit.
Drawer / Door Swap
The All-in-One Revit Kitchen Family has been the first parametric Kitchen Unit that allows to setup Drawers, Swing- or Sliding Doors or an combination of both. In the previous versions their was the limitation that the Drawers were always located underneath the Door Panel. Version 3 allows now to swap the position of the Door Panel with the Drawers just with one single click. It is now your choice how to arrange the Drawers together with the Door Panel.
Drawer Unit Height Lock
One of many improvements within existing functionality is the possibility to lock the Unit Height for Units with just drawers. In the previous Version, the Unit Height was automatically calculated based on the drawer height as well as the drawer count. If the drawer unit is used within a kitchen arrangement together with other units, it was quite difficult to setup the draw heights to match with the height of the remaining units. We have now added a tick box that allows to lock the unit height and therefore the drawer heights are being calculated automatically based on the drawer count.
... and if you haven't yet discovered the countless adjustment opportunities this All-in-One advanced parametric Kitchen Unit Revit Family offers to you ... just have a look on our Webpage and you will see all the possible setup configurations ... and don't forget ... it's all about parametric functionality, and there are no double Elements that just control the Visibility as you can see it from so many other Families out there ...
This All-in-One Kitchen Unit is a genuine Advanced Parametric Revit Family !!
Wednesday, 12 May 2010
The real Quality of a Revit Family finally gets unveiled as soon as it comes to the stage of Construction Design where the Revit Family delivers the Building Information to the Building Model.
The All-in-One Revit Door Family was designed from the ground up to be the most adjustable and most accurate Door Family to deliver to the exact data that is needed from the first design to the detailed construction documentation.
We have received hundreds of feedbacks as well as inquires since we have published the Door Family, and I would like to demonstrate the power of this Door Family with an example we have received many inquires on.
Revit is very powerful and gives to the Revit User free hand on how to organize the Building Structure.
An example is the subject of Floors, which has various approaches through the Revit community.
Mainly there are two approaches, depending on the size and complexity of the actual project.
Using the capability of the floor tool to create many layers and therefore create the structural floor as well as the finished floor in one floor type. This approach is obviously less flexible but easier to maintain and is probably mostly used in smaller developments.
The structural floor is separately created from the finished floor. In this circumstance, it is common to create two separate levels - one for the top of the structural floor and a second for the top of the finished floor.
The second approach, which is the more flexible and therefore used in larger developments, gives two possible ways to insert the Revit Door Family into the Revit Model. The Door Family can either be inserted in reference to the structural floor level or in reference to the finished floor level.
The All-in-One Revit Door Family is open to support either of these approaches as it lets you adjust the vertical position of the entire door as well as the wall opening at the bottom of the door.
The following images illustrate the powerful adjustments available within the All-in-One Revit Door Family that allow you to insert and setup the Door Family accordingly to your daily working standards.
The Parameter ROUGH DISTANCE BOTTOM is available as Type Parameter as well as Instance Parameter so it is your choice if you want to apply the Rough Distance Bottom (Floor Thickness) variating to each Instance or general to a Door Type.
Show the Opening Height on the Dimension Line
In relation to the wall opening, Revit gives the option to show the opening height on the dimension line. This Revit option shows the actual Value of the Height Parameter (in this case of the Door) underneath the dimension line. To give you as Revit User the choice if the Value shown as Opening Height shall be the Clear Height of the Frame or the Rough Height of the Opening, the All-in-One Revit Door Family (available from Version 1.2) gives you the option to set your preference with just one Tick Box.
These are just two of many powerful features, that have made this All-in-One Revit Door Family to one of the most successful Revit Families available with more then 500 downloads after just two weeks the All-in-One Door Family has been available.
To learn more about this amazing Revit Door Family visit The All-in-One Door Family Webpage.
Wednesday, 14 April 2010
After a very extensive development based on massive feedback that we have received, we are very happy to announce that the All-in-One Revit Door Family is available for download from today.
This Revit Door Family is definitely the best way to create and organize your Doors in your Revit Project.All of the built-in features in the All-in-One Revit Door Family were designed from the ground up to take advantage of the advanced parametric capabilities of Revit. So you can create any kind of Door with just one single Family that you can’t do with any other Door Family.
This Revit Door Family can be adjusted from a Single Door to a Double Door and even to a Sliding Door. The Door Frame is fully adjustable up to small details and can be switched with just one click between a Closure Frame, a Corner Frame as well as a Block Frame. The Door Panel is amazing too as it follows to the settings of the Frame and gives you an accurate Version of a Door Panel that you haven’t seen ever before. Finally this Door Family gives you a lot of Accessories for the Door Panel that can be fully scheduled.
The Door System
The All-in-One Revit Door Family is the best way to create Doors. The built in fully parametric Frame system lets you create any Door System you need for your Project. You can setup a standard single Door, with all Details, Materials and Functions you require and then just duplicate it to different Door Types and change with just one click to a double Door, or from a Swing Door to a Sliding Door. This is the first time that you can get all the Doors you need with just a few clicks. They all follow exactly to your requirements, and you don’t just get the Doors you need but you use just one Family and keep your Revit Project efficient and your Door Content easy to maintain.
The Wall Opening
The Wall opening doesn’t get that much attention with normal Door Families as you might have experienced. Not so with this All-in-One Revit Door Family as it lets you have full control over the Wall Opening with many adjustable parameters to get the Opening, the Render wrapping, Reveal, etc. exactly how you require it for your specific Project.
The Frame System
There’s nothing like the Frame System in the All-in-One Revit Door Family. With just a few parameters, it lets you adjust the Door Frame to various Frame Types, with various Rebates and either as Wood or as Metal Profile Frame in a way you never could before. The amazing thing is that you can change all this at any configuration - So you can for example setup a specific Door with specific Rebates, a specific Door Panel, Glazing and various Accessories and then just duplicate it to a Corner Frame Type, a Closure Frame Type or a Block Frame. It’s so simple and efficient ...
The Panel System
With the Panel System of the All-in-One Revit Door Family, you can do much more than just see them as Symbol line in your Plan view or as a 3D Door Panel in your Rendering. You have various ways to show your Door Panel in the plan view in a detail and accuracy you haven’t seen before. The Panel follows automatically to your Frame setup, and with just one click you can even switch between Flush and not Flush or create an glazing within your Door Panel.
There is even more Detail on the Accessories with a fully parametric Door Handle, that can be adjusted to a Emergency Bar, Lever handle, Pull Handle, Push Plate or just a Knob handle. There are also adjustable Kick Plates and more.
And finally the All-in-One Door Family lets you take advantage from the Revit schedule capabilities with all its great features and details.
To learn more about this amazing Revit Door Family visit The All-in-One Door Family Webpage.
Friday, 19 March 2010
We receive daily more then 100 comments & feedbacks from all over the world on our All-in-One Families and we take every one serious. We have massively improved the performance, the functionality as well as handy features on our All-in-One Families during the last couple of weeks to make them to the best Revit Content available.
There was one thing that our All-in-One Families were missing .... which we have taken care of now as well ....
Our All-in-One Revit Families are now Imperial which means that they are not just the best Revit Families available but from today all Revit Users (Metric & Imperial) can benefit from using them to make their Revit Projects even more efficient.
And the good news is ... Every one of our already available All-in-One Families as well as our future All-in-One Families from today come in Metric & Imperial together with just one Download. And not to forget, everyone who has downloaded our All-in-One Families will get the update with Imperial units for FREE (Learn more about our unique FREE Content Update Service).
Tuesday, 9 March 2010
Our All-in-One Revit Families are developed by a Team of Architects and Revit professionals and therefore they are not just really Advanced Parametric but also optimized for professional use.
The feedback on the Sash Window Revit Family was so enormous that we have decided to split the implementation which gives you the advantage of new Features in Version 2.0 already today !
There are more great Features that will come in Version 3.0 (FREE for everybody who has downloaded Version 1.0 or 2.0 with our FREE Content Update Service):
- Parametric Render Band
- Parametric Brick Arc Head
- Arc tapered Reveal
What's NEW at Version 2.0 ?
Performance & Flexbility
As we have done it with our All-in-One Kitchen Unit Family, the Version 2.0 of the Sash Window Family comes now with a Catalog File that improves massively the Performance of the Family and it gives you more Flexibility as we will bring continuous updates of the catalog file with additional preset Sash Window Types.
Additionally to the fully adjustable internal and external Sill available from Version 1.0 you have now the possibility to setup an external fully adjustable Stone Sill.
Cut linear joined Walls
The Wall opening cuts now additional joined linear Walls (e.g. as when dry-lining a stone wall with insulated plasterboard).The parametric internal and external Sill as well as the new Stone Sill give you all necessary adjustment possibilities to setup any linear joined Walls.
Improved Tapered Reveal
The tapered Reveal available from Version 1.0 has been improved as you can now control every side separate.
... and if you haven't yet discovered the countless adjustment opportunities this All-in-One Advanced Parametric Sash Window Revit Family offers to you - No Problem at all ... just have a look on our Website and you will see all the possible setup configurations ... and don't forget ... it's all about parametric functionality, and there are no double Elements that just control the Visibility as you can see it from so many other Families out there ...
This All-in-One Sash Window is a genuine Advanced Parametric Revit Family !!
Tuesday, 23 February 2010
As on all our All-in-One Families we have also received massive feedback on our All-in-One Kitchen Family that was published on 19th January this year. The Feedback has been a very positive one and has given us a very clear picture of what Revit Users all over the World clearly wanted. A very small percentage of the feedback was skeptical regarding the massive functionality as well as performance.
As we develop this special advanced Families for all the Revit Users out there, we have had a very close look at all these feedbacks and comments and we took them really serious ... the result is the All-in-One Kitchen Unit 2.0.
What's NEW at Version 2.0 ?
One of the critical issues with the first Version was the massive initial loading time of 1:55 minutes. In Version 2.0 we have optimized the formulas and we have now separated the 20 preset Types in a catalog file that alows you to just load those Types that you really need for your Project. The initial loading time is now up to 28x faster and takes just about 4 seconds !!
Legs - Kick Plate
Every Unit can now been setup for either a Kick Plate or with Legs. And that isn't all ... as you can have full control over the Legs with just one Parameter. Yes - The Kitchen Unit allows now to control the visibility of every single Leg with just one Parameter. Additional the Shape as well as Dimension of the Legs can be fully controlled. In case that you would like to use the Kick Plate, it allows you now to setup a separate Material.
What a kitchen would be without Backsplash ? If you would like Tiles or colored Glass, the fully parametric Backsplash gives you any possibility as it has it's own Material Parameter. Of course you can control the Visibility as well as the Hight of the Backsplash - that's obvious, or ?
One of the most asked features ... It took us quite a while (and a few hours evaluating various IKEA Kitchen Types) to find a really optimized way to still use the original Kitchen unit without having any Element double, just controlled with parameters
Wall hung - Corner Unit
If there is a normal Corner Unit, a corner Wall unit is obviously a must have ... It is still the same Kitchen Unit, just changing a few Parameters ... and you have a fully adjustable Wall hung Corner Unit.
Symbol Lines - Elevation & Plan
View The Kitchen unit shouldn't just be gorgeous in a 3D view, or ? Just look at it with an elevation view or an plan view and get a ready Kitchen Plan with all Symbol Lines in Elevation as well as Plan view. As our customers come from all over the world - we have taken care about localization as well - Yes, you can even control the direction of the Symbol Lines as they are varying in different countries ... Arrow from or to Hinge.
And still all amazing Benefits you might know from the previous Version ... ... and if you haven't yet discovered the countless adjustment opportunities this All-in-One advanced parametric Kitchen Unit Revit Family offers to you - No Problem at all ... just have a look on our All-in-One Kitchen Unit Revit Content Page and you will see all the possible setup configurations ... and don't forget ... it's all about parametric functionality, and there are no double Elements that just control the Visibility as you can see it from so many other Families out there ... This All-in-One Kitchen Unit is a genuine Advanced Parametric Revit Family !!
This advanced Parametric Sash Window Family with just 487 kB file size has been long await and was therefore very successful from the first minute after publishing.
Our Notifier Subscribers have been able to download it during the first week after release with their exclusive -67% Discount and they really made use of this amazing Benefit.
If you would like to Benefit as well from this huge discount on any new Revit Family we release (hurry ... it's just valid during the first week after release of each new Revit Family), just go to our Website and Sign up for FREE, it’s just that easy.
As we have received so many comments and requests prior to the development of this All-in-One Sash Window Revit Family, we have put into it 2 weeks of development to create the most advanced parametric Sash Window Family available for Revit.
As you can see at the banner image below, the possibilities to adjust this Revit Family are just countless. With this Family, you can definitely replace all Sash Window Families that you have used so far as you can virtually adjust every single element of the Window as well as the Wall opening.
If you would like to learn more about this new member of our All-in-One Families just visit the All-in-One Sash Window Revit Content Page and if you would like to learn more about our All-in-One Revit Family Series just visit our All-in-One Family Revit Content Page.
Monday, 25 January 2010
We are very happy about the very positive feedback we get all days long from all over the world by Revit Users experiencing the advantage of our Advanced Parametric Families combined with our unique Services for their Projects.
We have started this Series with the aim to provide better and more valuable Families for your Revit Project and we are happy to announce the Advanced Parametric Bi-Fold Door / Window as our new member of this successful Series today.
Also known as Folding Doors, Bifold Doors provide the flexibility to be fully opened, partially opened or totally closed, depending on the amount of space required. Exterior Bifold Doors also provide natural light, and the ability to connect the inside to the outside. Bifold Doors are ideal for connecting living rooms, entertainment areas, gardens and patios and can be custom designed to meet individual tastes and specifications. They can also be used in restaurants and offices to create partitions and space. Panels are usually connected together in a train and can be joined together in a number of configurations. Bifold Doors are designed to come in pairs, with two doors folding to one side, or with four doors that split in the centre and have two doors folding back to each side, and so on. However the term Bifold is used loosely and Bifold Doors can usually be manufactured to provide an even or odd number of doors (sometimes referred to as MultiFold Doors). Where an odd number of doors are used, a swing door is possible.
Our Advanced Parametric Bi-Fold Door is small in File size (with just 532 kB) and does it all and even more ...
- Adjust the numbers of Panels for each side and get either just Panels on one Side or on both Sides
- Adjust the Opening of the Panels for each Side separate
- Adjust the Dimension of all Profiles (Frame and Panel), Guide rail and even the Upstand
- Adjust it to a Bi-Fold Door or a Bi-Fold Window
- Adjust the reveal (Render Offset Interior and Exterior, Frame Position, Cavity Closer, etc.)
- Adjust the Threshold together with the Guide rail to either level the interior and exterior floor or make a step down
As all our Advanced Parametric Families, this new Bi-Fold Door has fully conditioned Parameters that makes it easy for you to adjust it and it guaranties that you will always get a satisfying Result rather the an Error Message saying “Constraints are not satisfied” as you can experience this with so many other Families.
Sign up for FREE for our Revit Content Notifier NOW at http://www.revit-content.com/notifier.htm
Wednesday, 20 January 2010
It is now already one week since we have published our first Advanced Furniture Family - The Cupboard / Wardrobe Family - and the Response was just incredible ... We have always believed in developing High Quality Revit Families that really (and I mean really) add great Value to the Revit User and we have been just overwhelmed with the positive Response and the incredible number of Downloads during the first week the Advanced Cupboard / Wardrobe Family was online. With our Advanced Parametric Revit Families we are definitely on the right way to provide not just the best Quality and User Experience available for Revit Families but also the best Value available for Money. Today we are more than happy to let you know that our next Advanced Parametric Revit Family is online available NOW. The Advanced Parametric Revit Family available from TODAY is an incredible flexible KITCHEN UNIT Family that is not just small in File size (with just 524 kB), but gives you one single Kitchen Unit that can be adjusted to virtually any Kitchen Floor Unit as well as Kitchen Wall Unit to arrange virtually infinite configurations of Kitchen arrangements. The Image above shows just one Sample of an Arrangement done with just this single Kitchen Unit Family. Every single Element from this Family can be adjusted and with its conditioned Parameters it is easy to setup with just ticking a box and all the transformation is done automatically.
- SINGLE FLOOR DRAWERS KITCHEN UNIT
- DOUBLE FLOOR DRAWERS KITCHEN UNIT
- DOUBLE FLOOR KITCHEN UNIT
- SINGLE FLOOR KITCHEN UNIT
- SINGLE WALL SHELL KITCHEN UNIT
- DOUBLE WALL KITCHEN UNIT
- SINGLE WALL KITCHEN UNIT
Thursday, 14 January 2010
Tuesday, 12 January 2010
- Dramatically reduced Content Costs
- Less Content to maintain
- Reduced Size of your Revit Projects
- Keep your Content easily updated with our further Family Development
- Get 19 preset Types including Drawers, Single Door Cupboards, Double Door Cupboards, Wall Hung Cupboards, Bookshelve, Wardrobes and Locker
- Countless preset Types for each advanced Revit Content Family that will be published regularly
You can Sign-up for FREE here ...